6 Common Weyerhaeuser Edge Gold Problems (Causes and Solutions)

Weyerhaeuser Edge Gold OSB panels are a good option if you’re looking to install them on your subfloor.

Weyerhaeuser is a respectable company that manufactures Edge Gold OSB. Additionally, a lot of people adore the panels’ fifty-year limited warranty.

These OSB panels have remarkable features like self-drain technology and a proprietary edge seal. Additionally, Weyerhaeuser OSB panels are completely sanded, guaranteeing a uniform and smooth finish right out of the box.

Even though Weyerhaeuser Edge Gold OSB panels are excellent, they do have some drawbacks. To help you decide if Ede Gold is the best choice, this article will discuss some of the common problems that people have with it.

Weyerhaeuser Edge Gold Frequently Has Issues

• 1. The Width Is Less than Promised

The majority of people frequently experience Weyerhaeuser OSB panels being smaller than what is advertised.

If you purchase 48-inch-wide Edge Gold panels, their width will be 47 ¾” when they are delivered. Weyerhaeuser is not the only company impacted by this issue. However, almost all T&G subfloors have it.

Although this might not seem like a major issue, you will find that gaps will remain on the edges when you get to the installation stage.

In order to cover the gaps left by this, you will need to purchase additional panels. There will be some waste left over because you won’t use the entire board.

If you have not yet purchased Weyerhaeuser Edge Gold OSB panels, be sure to determine the precise width measurements in order to prevent such situations. This will make it much easier for you to cut your panels into pieces that fit.

• 2. Swelling

The Edge Gold OSB panels from Weyerhaeuser have a special seal that keeps moisture out. However, as is well known, an OSB panel will always swell after prolonged exposure to moisture, regardless of the kind of treatment it receives.

Rain is known to cause Edge Gold panels to swell when they are being stored or installed. The likelihood of the subfloor being exposed to moisture is very high if you live in an area that receives a lot of rainfall.

The good news is that keeping Weyerhaeuser Edge Gold panels in a dry, cool place will help them avoid swelling.

It would also be wise to install the roof before laying the subfloor. By doing this, rainwater won’t strike the OSB directly.

Weyerhaeuser has made great progress in making their panels resistant to rainwater, even though we are still debating the swelling issue.

A few years ago, for example, they unveiled Self-Draining technology. These boards have strategically placed holes to allow water to drain.

In order to stop water from leaking through the board, these holes are also sealed. New Edge Gold panels are available with this technology.

• 3. The sound of squeaking

It’s annoying to live in a house with a squeaky floor. For this reason, you need to be ahead of the game before this issue even arises. Long-term dampness can also cause Weyerhaeuser Edge Gold OSB to squeak.

The fasteners on these panels come loose after extended drying periods. This holds true for the adhesive as well. The floor consequently becomes squeaky.

Usually, you are forced to replace your Edge Gold subfloors when they start to squeak. Making sure the boards don’t remain wet for an extended period of time will stop them from squeaking.

Static water can be eliminated by utilizing the Self-Drain technology. Additionally, investing in a home wrap like Tyvek is a smart idea if you live in an area that experiences a lot of rain. Your OSB floor will stay dry thanks to this.

• 4. Mold

When OSB panels are used, a number of moisture issues are likely to arise. Mold cannot grow on Weyerhaeuser Edge Gold OSB panels. Mold thrives in an environment where they are exposed to excessive moisture.

Before continuing with the construction, you should take care of any mold that you find on your OSB panels.

Eliminating the entry of moisture and water is one way to achieve that. Planning how to improve the ventilation in the house is also a good idea.

• 5. Too Much Force Causes Edge Gold Panels to Crush

According to Weyerhaeuser, its OSB panels are resilient and long-lasting. However, when subjected to excessive force, like hammering, these boards crumble and crush, just like other OSB floors.

There are times when installing an OSB panel may require cramming the board into a small area. The board will be damaged if you hammer it directly. Always cover it with a block of wood.

• 6. Edge Gold Installation Is a Little Crazy

Weyerhaeuser’s Edge Gold is more tiresome than other OSB panels. This subfloor weighs more and is thicker. As a result, installing it might require an additional set of hands.

Second, nails alone won’t hold these panels to the ground. They must be adhered with glue. That requires more effort.

I should also mention that cutting the Edge Gold boards is difficult. With this product, you will also have to overcome this obstacle.

Is the Edge Gold from Weyerhaeuser a bad product?

That is untrue. There are some positive aspects of Weyerhaeuser Edge Gold OSB panels besides these minor issues. This OSB subfloor is a worthwhile choice because of its remarkable features.

For example, this flooring option comes with a long fifty-year warranty. This demonstrates Weyerhaeuser’s confidence in the caliber of its OSB panels.

Additionally, the Weyerhaeuser Edge Gold is completely sanded. As a result, a uniform and smooth finish can be guaranteed after installation. Additionally, we must commend the introduction of the self-draining downpore technology.

The Edge Gold doesn’t require drain holes to be drilled, in contrast to other OSB panels. Additionally, this technology stops the OSB panels from swelling, squeaking, and growing mold. Not to be overlooked is the proprietary edge seal, which stops moisture from absorbing.

Can Hiring a Skilled Contractor Help You Avoid Weyerhaeuser Edge Gold Issues?

A skilled contractor will avoid common Weyerhaeuser Edge Gold issues like moisture damage by applying their expertise and experience.

Therefore, if you are unsure of your OSB installation abilities, it is advisable to hire a professional. Meanwhile, the terms “professional” and “expert” are being used incorrectly these days.

Self-made contractors sometimes lack the resources and expertise necessary to properly install an Edge Gold subfloor.

As a result, when hiring, you must be meticulous. Request licenses and experience documentation at all times. There is no other way to guarantee an error-free Edge Gold installation.

How Common Are Problems with Weyerhaeuser Edge Gold?

As this article’s introduction states, Weyerhaeuser produces OSB panels of a respectable caliber. Simply put, there are a few problems with their panels, but the majority are preventable.

I can vouch for the fact that Weyerhaeuser Edge Gold issues are not commonly encountered. You will find fewer complaints regarding Weyerhaeuser Edge Gold if you conduct additional online research.

Additionally, moisture is the main issue with this OSB panel. Your OSB panels should last you a very long time if you can figure out a way to keep water away from them.