6 Best DRYLOK Alternatives (Reviewed)

One of the greatest waterproofing products available is Drylok. It can be applied to exteriors and interiors as a waterproof sealer.

It does an excellent job of keeping water from leaking through your walls and floor, and it comes with a transferable warranty. Drylok comes in a variety of formulas that are suitable for different circumstances.

It is clear from the description that Drylok is a superb waterproofer. However, there are some situations in which local stores might not carry Drylok.

Or you might want to look into other options because you had some negative experiences with Drylok. We’ll look at a few of the well-liked Drylok substitutes in today’s post so you can waterproof your walls and floors.

1. Quikrete Sealer for Waterproofing

The Quickrete waterproofing sealer is a great option if you’re searching for a Drylok substitute because local retailers don’t carry it.

In the construction sector, Quikrete is a fairly well-known brand, and their products are widely available nationwide, including at Home Depot stores.

Similar to Drylok, Quikrete waterproofing sealer aids in keeping moisture out of stucco, brick, concrete floors, and walls.

The natural-looking finish of Quikrete is what makes it unique. It has no effect whatsoever on the surface appearance after application. Bottles of one or five gallons are available.

Depending on the surface area you want to waterproof, you can select the appropriate amount. Please be aware that 150 square feet can be covered by one gallon of Quikrete waterproofing sealer.

It’s also important to note how water-resistant Quikrete waterproofing sealer is. When used properly, it can endure for many years. In addition to having a mild smell, this waterproofer is known to prevent the growth of mold.

2. Permaflex Sani-Tred Waterproofing

Sani-Tred is an option for those of you who have had a negative experience with Drylok and would like to try something different.

Sani-Tred is a liquid polyurethane coating that creates an impermeable membrane by penetrating deeper into walls and floors than Drylok, which is based on cement.

In addition to concrete, Sani-Tred can be used to waterproof plastic, steel, aluminum, and wood. As a result, it is a more adaptable waterproofer than Drylok. My favorite thing about Sani-Tred is that, when applied properly, it doesn’t peel, crack, chip, or delaminate.

The Sani-Tred waterproofing coating has some rather distinctive qualities, despite not being as well-known as Quikrete and Drylok. For example, its tensile strength is 2,030 psi, the same as Drylok’s, which is only 12 psi.

Sani-Tred’s manufacturers claim that it dries into a coating as durable as a truck tire and penetrates deeper into walls and floors. This implies that no moisture or water will seep through the walls or floor and harm your foundation.

Sani-Tred is a great substitute if you’re sick of Drylok’s formula and want something much more potent.

3. Watertite Zinsser

Zinsser Watertite is another well-liked Drylok substitute that provides superior waterproofing. Zinsser’s formula and Drylok’s are somewhat comparable. They are oil-based and acrylic waterproofers.

Additionally, they can be applied to the same surfaces, like subfloors and concrete walls. A brilliant white finish is left behind by both. That being said, Zinsser Watertite outperforms Drylok in terms of waterproofing.

Additionally, Zinsser provides longer waterproofing. Unlike Drylok, which only lasts 15 years, it can last up to 20 years.

When compared side by side, Zinsser Watertite offers more features and advantages than Drylok. However, you should be aware that Zinsser Watertite is somewhat more complicated to use and costs more than Drylok. You can even use a sprayer to apply Drylok.

Unfortunately, Zinsser Watertite is not in the same category. However, the difficult application process will be worthwhile when you weigh the advantages of this Drylok substitute.

4. Waterproofing with Rub-R-Wall

You will discover that there are numerous waterproofing products available that perform significantly better than Drylok. Similar to Sani-Tred, Rub-R-Wall is not very well-liked but performs admirably.

This waterproofing solution is liquid and dries into a rubber membrane. Because Rub-R-Wall waterproofing is flexible, it can tolerate subfloor movement, unlike Drylok. There are two versions of Rub-R-Wall: the standard version and the stronger Plus version.

A limited lifetime warranty is included with both options, something that other waterproofing products might not offer. The way Rub-R-Wall is applied is a little different.

Since certified installers are required to apply it, you can do it yourself. Although professional installation ensures that the waterproofer will be applied correctly, this may seem a little inconvenient.

Rub-R-Wall’s manufacturer claims that their waterproofing product has a lifespan of over a century. It is claimed that the developed membrane is so resilient that it can tolerate severe damage.

The waterproofing membrane made by Rub-R-Wall is incredibly elastic. This is excellent since it shows that it can withstand cracking and shrinking. This waterproofing offers extremely strong adhesion.

In addition to waterproofing, Rub-R-Wall offers a variety of coatings, including PPD Professional Pride Dampproofing and GrayWall waterproofing.

Another feature that Drylok shares is the extensive availability of formulas. Additionally, it enables you to select a formula that is more tailored to your particular circumstance.

5. The RadonSeal

You should be familiar with RadonSeal if you have been sealing basements for a long time. Among the earliest waterproofing products available is this one.

Since its initial release in 1997, both professional contractors and do-it-yourselfers have utilized it as a masonry waterproofer.

An excellent substitute for Drylok is Radonseal. Both residential and commercial properties can use it in their basements. This environmentally friendly solution can stop moisture from getting into driveways, patios, pool decks, chimneys, and garage slabs.

Ask about RadonSeal if you’re sick of musty smells in your basement and you can’t find any Drylok. Mold problems can be resolved permanently with RadonSeal.

6. Waterproofer by Behr

The silicone used to make Behr waterproofer and masonry sealer penetrates deeper into your walls and floor before solidifying into a membrane. The purpose of Behr waterproofer was to assist homeowners in avoiding the consequences of water damage to their foundations.

Behr waterproofer has a natural finish, just like Drylok. Up to 250 square feet can be covered with one gallon of Behr waterproofer. Drylok’s coverage, which is 100 square feet per gallon, is far less than this.

In addition to being widely accessible, Behr waterproofer is reasonably priced. It is available at the majority of Home Depot stores. These are additional justifications for using it in place of Drylok.

Despite being a good substitute, Behr performs poorly in high-stress situations. If there is a lot of rain and wind in the area, you should not use it.

The process of applying Behr waterproofer is quite simple. No adhesive or primer is required. Before applying, just be sure to get rid of any impurities and outdated sealants.