BEHR DryPlus vs. DRYLOK: Which is better?

A major concern for many property owners is moisture. Not all concrete and masonry are 100% waterproof.

It is possible for moisture to seep in from the outside, which can cause a number of problems like internal damage, corrosion, and the growth of mold. Rainwater can, after all, contain impurities that erode materials in your wall, like wood.

Use of concrete and masonry waterproofers is something you might want to think about if you’re concerned about the effects of moisture seeping into your walls.

These products stop moisture from penetrating your concrete walls by sealing them. Among the numerous masonry waterproofers, BEHR DryPlus and DRYLOK are the most exceptional.

As a result, you might be forced to choose between the two. You can compare these two waterproofers and make an informed choice by using the guide below.

What Is DryPlus from BEHR?

Masonry waterproofer BEHR DryPlus is designed to be applied to porous concrete surfaces. Masonry that is outside or indoors can both be treated with this product. As a result, you can stop moisture from penetrating your walls from the inside as well.

BEHR DryPlus is a great basement waterproofer because of its remarkable capacity to keep moisture out. Although you can tint it to get the desired color, it has a flat finish.

This waterproof paint is suitable for use on brick, stucco, garage walls, retaining walls, and landscape walls in addition to basements.

Surfaces that are dry or damp can be treated with BEHR DryPlus. However, locations where there are active water leaks shouldn’t use it.

An area up to 125 square feet can be covered with one gallon of BEHR DryPlus. Make sure you figure out how much will be sufficient. To completely seal your walls against moisture, apply two coats of BEHR DryPlus.

It takes an hour for this masonry waterproofer to dry. Within four hours, it can be recoated. Give BEHR DryPlus anywhere from 7 to 14 days to fully cure.

One thing to bear in mind when applying BEHR DryPlus is that it should be used on recently installed concrete or masonry that has loose material or cracks in it.

Additionally, it should only be used on spotless surfaces devoid of impurities like mold. It is operational right out of the box. Thus, avoid thinned it. Apply it with a nap roller or brush for optimal results.

An airless sprayer can also be used to paint this waterproofer. The ease of applying BEHR DryPlus with an airless sprayer that doesn’t clog has received a lot of positive feedback.

How Does DRYLOK Work?

Conversely, DRYLOK is just as well-liked as other waterproofing products. This company has been in business for nearly 70 years.

A variety of masonry care formulas are produced by DRYLOK. But we’ll concentrate on its waterproofer for masonry and concrete.

There is a transferable warranty included with this item. In contrast to most businesses, DRYLOK’s warranty is attached to the project and not the installer.

The excellent customer service provided by this brand is something else I adore. They will support you at every stage of the masonry waterproofer installation.

DRYLOK has two formulas for the masonry waterproofer, as was previously mentioned. The original concrete waterproofer, as well as the extreme, powdered, floor and wall versions, are available. It is possible to tint both formulas in multiple colors.

DRYLOK is similar to BEHR DryPlus in that it can be used indoors and outdoors. This powerful mixture can tolerate up to 15 psi of water pressure and winds of up to 140 mph. Your walls will become waterproof with a maximum of two coats.

One gallon of DRYLOK is sufficient to cover up to 100 square feet. In about 45 minutes, it dries to the touch. It can be recoated in two hours, which is fairly quick. It dries completely in five to seven days.

DRYLOK can be sprayed on, roller applied, or brush applied. A smooth, level finish is what’s left behind. Brick, stucco, poured concrete, and masonry walls can all be treated with it.

The DRYLOK waterproofer’s manufacturer asserts that wet surfaces are suitable for application. But using it on a clean, dry surface will yield better results.

DRYLOK has a ten-year shelf life if applied properly. This product’s lengthy and transferable warranty is what I adore about it.

You are always welcome to make a warranty claim if something goes wrong. Floors shouldn’t use this waterproofer because it won’t withstand foot traffic for very long.

Please be aware that only masonry and concrete projects are suitable for this waterproofer. Never apply it on metal or wood surfaces.

What Distinguishes Them?

• Duration of Drying

Within an hour, BEHR DryPlus waterproofer dries to the touch. Within four hours, it can be recoated. And a full recovery takes seven to fourteen days.

DRYLOK dries in 45 minutes to the touch. It is recoatable after two hours. The best part is that it takes 5 to 7 days for it to fully heal.

When comparing the two concrete waterproofers, DRYLOK’s formula dries faster than the other. Thus, DRYLOK is the better option if you need to waterproof your walls quickly.

• Feature

Up to 125 square feet are covered by one gallon of BEHR.

DRYLOK only covers an area of 100 square feet per gallon.

You can be sure that BEHR DryPlus will provide greater coverage than DRYLOK. Additionally, covering more area results in cheaper overall expenses.

• The quantity of available formulas

The BEHR DryPlus waterproofer comes in a single version.

There are about four varieties of DRYLOK waterproofers for masonry and concrete. There is the Extreme version of the Original Waterproofer, which is an improved version.

If you would rather mix the consistency of your paint, a powdered waterproofer is perfect. A DRYLOK wall and floor waterproofer is also available. Since most waterproofing products aren’t meant to be used on floors, this option is convenient.

It is highly recommended that you consider DRYLOK if you would like to select from a variety of waterproofing products.

• Capability to Withstand Pressure

Up to 12 psi of water pressure can’t penetrate BEHR.

Up to 15 psi of water resistance is offered by DRYLOK.

You will have a better chance of waterproofing your external walls with DRYLOK than with BEHR if you live in a windy and rainy area.

What Similarities There Are Between Them?

• Count of Coats

BEHR DryPlus and DRYLOK both call for a maximum of two coats. Either product will sufficiently waterproof your walls and keep moisture out with two coats.

• Applicability Techniques

Using a brush, roller, or airless sprayer, you can apply masonry waterproofers, regardless of the type you choose. It’s important to note that BEHR DryPlus doesn’t clog, making it simpler to apply with an airless sprayer.

• It Is Usable for Both Exterior and Interior Use

As you can see, both options work for the outside as well as the inside. That’s how durable DRYLOK and BEHR DryPlus are.

• Has Multiple Color Tinting Options

Both products have a variety of tints or color shades to choose from if you’d like a more aesthetically pleasing finish.

Benefits Of DryPlus BEHR

• Increased coverage per gallon
• Simple to use with an airless sprayer
• It is suitable for both indoor and outdoor use.
• It can have multiple shades applied to it.
• Sturdy

Cons

• The drying period is longer.
• Not very resilient to water and wind

Benefits Of DRYLOK

• Its drying time is faster.
• Various formulas are available
• Very resilient to high pressure and winds
• It can be tinted in various colors.
• It is produced by a reliable company.

Cons

• DRYLOK doesn’t travel very far in a gallon.
• There is a chance of flaking.

Which Is Better, DRYLOK or BEHR DryPlus?

Every product, including BEHR DryPlus and DRYLOK, has advantages and highlights. But as the summary above shows, there are a lot of significant variations.

When applied correctly, both options work wonders at waterproofing walls. DRYLOK, however, is superior to its counterpart in terms of features and benefits. It is more wind- and rain-resistant, dries more quickly, and comes in a variety of formulas.